Expert Answers about Chevrolet Boat Trailer Parts

• Parts Needed For A Spartan SB140 Boat Trailer
• Yes, I can help you find parts for your Spartan SB140 boat trailer. I will start with the winch. The 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs, part # 315-W3200D, is a 2-speed manual winch. It can winch up to 3,200 lbs. It will attach directly to the winch stand. The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide, part # CE31013G, is a perfect addition to mount your winch to on your boat trailer. It will mount onto your boat trailers 2" tongue. Once...
  view full answer...


• Parts Needed To Convert Boat Trailer From Rollers To Bunk Boards
• Switching from roller bunks to bunk boards on your boat trailer is fairly straightforward. For the most part, you will just be replacing the rollers with the boards. We have the following bunk boards available: -CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long # CE27800 -CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long # CE27810 -CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long # CE27820 -CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long # CE27840 -CE...
  view full answer...


• Can I Use the CE Smith Self Centering Keel Roller on my Trailer
• I may have a solution for you, but it doesn't look like your trailer has any bracket in place in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer. For that reason you would first need to have a roller bracket like the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G welded to the frame or attached with U-bolts to match your trailer frame size. If you went the welded on route, the # CE10305G is galvanized steel...
  view full answer...


• Boat Won't Sit Properly on Boat Trailer Roller System
• I can definitely help you figure out what bunk boards to use, but I think with a little adjustment we can get your boat to load much easier with your current setup. Since rollers are considered an upgrade compared to carpeted bunk boards it's a little unusual to want to "downgrade" (in a sense) your boat trailer. From the pictures you sent in and the way you phrased the problem that you're having, it sounds like your Cakins boat makes contact with the keel rollers on your winch stand and...
  view full answer...


• Recommended Parts to Use on Boat Trailer for 1957 Wooden Hulled Sedan Convertible Boat
• For the best boat trailer setup you will want to use a combination of roller bunks, like part # DL21741, along with guide-ons, like part # CE27600, and a keel roller. Since there are a variety of boat styles out there, it is best for you to choose which keel roller and length of boards and rollers are best for your application. I have linked our selection of keel rollers, bunk rollers that are rated for 3,000 lbs to ease the loading process, as well as our selection of guide-ons for stability,...
  view full answer...


• Are Dacromet and Stainless Brake Finishes Good for Boat Trailers
• Yes, the Dacromet/Stainless finish on the 10" Kodiak Disc Brakes # KOD67FR is arguably the best for boat trailers since it's the most resistant to rust and corrosion, although it's still a good idea to hose down your trailer with clean freshwater once you're done boating for the day. Then for a flexible brake line kit we have part # 15SI-BLKIT which comes with a 15' lead or the part # 18SI-BLKIT which comes with an 18' lead. Attached are some review videos for you to check out!
  view full answer...


• Recommended Back Up Camera for Boat Trailer
• For a back up camera on a boat trailer that's being submerged regularly I recommend going with the Swift Hitch wireless camera, part # 04928. It isn't submersible, and none of the cameras we carry are, but being that it's competely wireless it can be mounted in a place to avoid the water. It's magnetic so you can move it as needed. You could probably find a place on top of the boat to mount it to help with launching.
  view full answer...


• Parts Needed to Convert a Boat Trailer From Bunk Boards to Roller Bunks for a 21' Boat
• Each pair of Boat Trailer Deluxe Roller Bunks # DL21740 have a 2,500 lb. capacity. Your bigger consideration will be the length because with needing multiple pairs of rollers, you will have enough weight capacity. Typically you will want to match the length of your current bunks with the news ones. But a good rule of thumb is to have at least 50% of the length of your boat. I have included enough bunk rollers and parts needed for that below. Bunk Rollers - Boat Trailer Deluxe Roller Bunks...
  view full answer...


• Are Parts Available for Yates 5 Inch Wobble Rollers?
• We carry boat trailer hardware though not all parts for the Yates Ribbed Wobble Roller 5" Diameter # YR500YW-6P. We do offer Wobble Roller Washer for 3/4" Shaft # CE10983 and Wobble Roller Retainer Ring # CE10981. I have added a link for you to all of our available boat trailer parts so you can take a look.
  view full answer...


• What Parts Are Needed To Add hydraulic Brakes To Boat Trailer For 2002 Skeeter Bass Boat
• In order to add brakes to your trailer for your 2002 Skeeter Bass Boat, we will need to know what your trailer currently has. You will need to know the axle weight capacity. There is normally a plate or sticker on the axle that lists the weight capacity. If you are unable to find that, you can get the numbers from the bearing and seal to determine what size axle you have. I have attached a photo that shows where you can typically find the bearing and seal numbers. I have attached a helpful...
  view full answer...


• Should Galvanized Axles Be Used on Boat Trailers
• For a boat trailer, you'd really want to use a galvanized axle. We offer a galvanized boat trailer axle from CE Smith as part # CE33201GA for the axle beam only or # CE33201GA-HUB the axle and hubs. The axle has an 1800 lb capacity, and a hub face to hub face dimension of 57-1/2 inches. The spring seats are 46-1/2 inches apart on center. If you need a different sized axle, you'll need to custom order one from your local trailer supply house.
  view full answer...


• How to Add Sway Control to a Boat Trailer that has Surge Brakes
• Typically you will experience sway from your trailer when the trailer isn't loaded properly. It is encouraging that your engine is mainly over the axle, but it would be best to verify that the tongue weight (TW) of your trailer is 10-15% of the loaded weight of your trailer. A properly loaded trailer is your first step into reducing trailer sway. Since most boat trailers have a pole tongue you will need to use a pole-tongue adapter like part # RP58393 and a weight distribution (WD) system...
  view full answer...


• Parts Needed To Convert Boat Trailer From Roller Bunks To Bunk Boards
• Although we don't have an actual guide, switching from roller bunks to bunk boards on your boat trailer is fairly straightforward. For the most part, you will just be replacing the rollers with the boards. You can use bunk boards like the # CE27820. You will also need brackets # CE10001G-4 and U-bolts # CE15283GA-4 to mount the boards. I'm not entirely sure what your setup is, so I went ahead and included a link to all of our bunk boards at the bottom if you need a different length. I...
  view full answer...


• Parts Needed to Convert a Boat Trailer to Bunk Boards
• It sounds like you are wanting to convert a boat trailer to bunk boards. There is not a kit for this because each trailer/boat varies. To do the conversion you will need the bunk boards, brackets and u-bolts. It is recommended to have bunk boards that are at least 50% of the length of your boat. You can have longer boards if you would like, but you want at minimum 50% of the length. I have included the length of bunk boards that we carry below. You can piece the lengths together as needed...
  view full answer...


• How to Choose Correct Boat Trailer Fenders
• I didn't receive any information about your boat trailer, but I can explain how we classify them for you, which hopefully will help you to decide which fenders you want to go with. If you're only looking to replace one fender, unfortunately we have no way of looking up which exact fenders your boat trailer left the factory with. You might need to go with 2 fenders so they'll match. We classify the fenders according to the wheel diameters they're compatible with. For instance, the Fulton #...
  view full answer...


• Parts Needed for Converting 8" Wheels On CE Smith Multi Sport Trailer from 8" to 12" Wheel and Tire
• Yes, you can change the wheels on the CE Smith Multi Sport Boat and Kayak Trailer # CE48810 from 8" to 12". This would give you a trailer like the CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870. To complete the conversion you will need 2 of the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30590 and 2 of the CE Smith Single Axle Trailer Fenders # CE17701G to move to the larger tires.
  view full answer...


• Which Stealth Hitch Option for Towing Small Boat With 2021 Hyundai Palisade
• The # 391CONVPT5L Stealth Hitch you'd looked at doesn't include the receiver that's designed for towing, it's meant for hitch mounted accessories only, but there are options that would allow you to tow your boat. To tow your boat, there's a couple ways you can go to upgrade to make that possible. You could use the part # 391CONVPT5L hitch, add the # 391BMU5L ball mount and a # 63845 2-inch trailer ball and the # CU94FR 4-pole trailer wiring harness, which would provide you everything you...
  view full answer...


• Wiring to Connect 5-Flat on Trailer and 4-Round on Boat to 5-Flat on Tow Vehicle
• Although we do not carry a wiring harness/adapter that will allow you to split the 5-flat on your tow vehicle to allow you to connect to both the 5-flat on the trailer and the 4-round on the boat, I have a solution for you. You will need the RoadMaster 4-Wire Connectors, # RM-910030-4, Jacketed 4-Wire (sold by the foot), # DW03240-1, and the Deka Heat Shrink Butt Connectors, # DW05745-5. I recommend that you splice into the wiring, behind the 5-flat on your trailer, in order to add the...
  view full answer...


• Determining The Correct Bearings And Seals For A 2007 EZ LOADER Boat Trailer
• I can help you find the correct bearings and seals for your 2007 EZ Loader boat trailer. It will require you to remove your bearings and seals. Your trailer's bearings and seals have part numbers on them. Once you remove the old bearings and seals, you can find those numbers. If you provide me with the bearing and seal part numbers, I can find the replacement part for you. In the case you can not identify the part numbers, we do have an alternate solution. It would require you to take...
  view full answer...


• How to Equip 2022 Hyundai Palisade for Towing Boat Trailer With 5 Pole Trailer Connector
• Depending on how comfortable you are with wiring/vehicle electrical, there's two routes you could go to equip your 2022 Hyundai Palisade for towing your surge coupler equipped boat trailer. The least complicated way to do this would be to install a 4-pole trailer wiring harness using part # CU94FR and install it according to the linked video. You'd then use an adapter like # 20036. The additional blue wire on the adapter would tap into the reverse lamp circuit on the vehicle. To avoid...
  view full answer...